Skip to content
Visit our Brisbane boutique — no appointment required. Browse online, then visit our Brisbane boutique for guidance.

Your selection

Your cart

Loading your cart…

Jewellery size guide

Find the right fit

Measure at home with a ring, bangle, ruler or flexible tape. These charts are a starting point; for an important purchase, our team can confirm the fit before you order.

View measurements in

Choose one display unit. The charts and necklace labels convert the same measurements for you; ruler illustrations remain in millimetres.

01 · Rings

Measure a ring that already fits

Use a ring worn comfortably on the intended finger. Measure its opening—not the outside of the band.

Measure a ring's inside diameter The left inside edge of a ring is aligned with zero on a complete millimetre ruler. The opposite inside edge reads 16.5 millimetres. 0510152025 mm START AT 0 READ 16.5 MM
Method illustration—not full sizeUse a physical millimetre ruler. Align one inside edge with 0, then read the opposite inside edge.
  1. 1
    Choose the right ring

    Use a round ring that fits the same finger comfortably.

  2. 2
    Measure the opening

    Lay it flat and measure the widest part of the inside opening in millimetres.

  3. 3
    Match the chart

    Find the closest diameter below. If you fall between sizes, ask us before ordering.

Australian / UK ring size conversion
AU / UK sizeInside diameterInside circumference
J15.7 mm1.57 cm0.62 in49.3 mm4.93 cm1.94 in
K16.1 mm1.61 cm0.63 in50.6 mm5.06 cm1.99 in
L16.5 mm1.65 cm0.65 in51.8 mm5.18 cm2.04 in
M16.9 mm1.69 cm0.67 in53.1 mm5.31 cm2.09 in
N17.3 mm1.73 cm0.68 in54.3 mm5.43 cm2.14 in
O17.7 mm1.77 cm0.70 in55.6 mm5.56 cm2.19 in
P18.1 mm1.81 cm0.71 in56.9 mm5.69 cm2.24 in
Q18.5 mm1.85 cm0.73 in58.1 mm5.81 cm2.29 in
R19.0 mm1.90 cm0.75 in59.7 mm5.97 cm2.35 in
S19.4 mm1.94 cm0.76 in60.9 mm6.09 cm2.40 in
T19.8 mm1.98 cm0.78 in62.2 mm6.22 cm2.45 in
U20.2 mm2.02 cm0.80 in63.5 mm6.35 cm2.50 in
V20.6 mm2.06 cm0.81 in64.7 mm6.47 cm2.55 in

02 · Bangles

Start with a bangle you already wear

Measuring a well-fitting, round bangle is the simplest method. If you do not have one, measure around the widest part of your closed hand.

RecommendedMeasure an existing bangle
Measure a bangle's inside diameter The left inside edge of a size 2–6 bangle is aligned with zero on a millimetre ruler. The opposite inside edge reads 60.3 millimetres. 01020304050607080 mm START AT 0 READ 60.3
Method illustration—not full sizeUse a physical millimetre ruler. Measure through the centre from inside edge to inside edge.
AlternativeMeasure around your hand
Flexible tape wrapped around the widest part of a closed hand
Measure the widest partBring your fingers together, fold the thumb inward and wrap flexible tape around the knuckles without pulling tight.
Indian bangle size conversion
Bangle sizeInside diameterInside circumference
2–254.0 mm5.40 cm2.125 in169.6 mm16.96 cm6.68 in
2–457.2 mm5.72 cm2.250 in179.5 mm17.95 cm7.07 in
2–660.3 mm6.03 cm2.375 in189.5 mm18.95 cm7.46 in
2–863.5 mm6.35 cm2.500 in199.5 mm19.95 cm7.85 in
2–1066.7 mm6.67 cm2.625 in209.5 mm20.95 cm8.25 in

03 · Necklaces

Choose where you want it to sit

Placement varies with neck size, height, neckline, pendant weight and jewellery design.

Necklace placement guide labelled in centimetres: Choker 35–40 cm, Collar 40–45 cm, Princess 45–50 cm, Matinee 50–60 cm, Opera 70–90 cm and Rope over 90 cm
Placement is a guide only. Neck circumference, body proportions, chain design and pendant weight can change where a necklace sits.